Installation Process
Step 1
Clean the glass. Spray the glass with mounting solution. Use squeegee to clean the glass
Step 2
Re-spray the glass before applying film
Step 3
Remove the liner of the film
Step 4
Spray the solution into the exposed adhesive while peeling the liner away
Step 5
Place the film on the wet glass and position it correctly
Step 6
Squeegeeing the water and air out from under the film
Step 7
Trim edges of film and squeegee dry
Step 8
Touching up of the film
Step 9
Final inspection and job completed
Step 1Clean the glass. Spray the glass with mounting solution. Use squeegee to clean the glass
Step 2Re-spray the glass before applying film
Step 3 Remove the liner of the film
Step 4
Spray the solution into the exposed adhesive while peeling the liner away
Step 5
Place the film on the wet glass and position it correctly
Step 6
Squeegeeing the water and air out from under the film
Step 7
Trim edges of film and squeegee dry
Step 8
Touching up of the film
Step 9
Final inspection and job completed